+------------------------------------------------------------------------
+r925 | lh3lh3 | 2011-02-28 15:45:17 -0500 (Mon, 28 Feb 2011) | 2 lines
+Changed paths:
+ M /trunk/samtools/phase.c
+
+minor changes to a heuristic rule
+
+------------------------------------------------------------------------
+r924 | lh3lh3 | 2011-02-28 15:24:04 -0500 (Mon, 28 Feb 2011) | 4 lines
+Changed paths:
+ M /trunk/samtools/bam.h
+ M /trunk/samtools/bcftools/vcfutils.pl
+ M /trunk/samtools/phase.c
+
+ * 0.1.12-r924:126
+ * fixed a bug in phase (due to recent changes)
+ * fixed a bug in vcf2fq
+
+------------------------------------------------------------------------
+r923 | lh3lh3 | 2011-02-28 12:57:39 -0500 (Mon, 28 Feb 2011) | 5 lines
+Changed paths:
+ M /trunk/samtools/Makefile
+ M /trunk/samtools/bam.h
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/phase.c
+
+ * put version number in bam.h
+ * write version to BCF
+ * in phase, change the default -q to 37
+ * output a little more information during phasing
+
+------------------------------------------------------------------------
+r922 | lh3lh3 | 2011-02-25 16:40:09 -0500 (Fri, 25 Feb 2011) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/bcftools/bcf.c
+ M /trunk/samtools/bcftools/bcf.tex
+ M /trunk/samtools/bcftools/bcf2qcall.c
+ M /trunk/samtools/bcftools/bcfutils.c
+ M /trunk/samtools/bcftools/ld.c
+ M /trunk/samtools/bcftools/prob1.c
+ M /trunk/samtools/bcftools/vcf.c
+ M /trunk/samtools/cut_target.c
+
+ * change the order of PL/GL according to the latest VCF spec
+ * change the type of SP to int32_t
+
+------------------------------------------------------------------------
+r921 | lh3lh3 | 2011-02-25 14:40:56 -0500 (Fri, 25 Feb 2011) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/bcf.tex
+
+update the BCF spec
+
+------------------------------------------------------------------------
+r920 | lh3lh3 | 2011-02-25 00:59:27 -0500 (Fri, 25 Feb 2011) | 2 lines
+Changed paths:
+ M /trunk/samtools/Makefile
+ M /trunk/samtools/bam_md.c
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bam_sort.c
+ M /trunk/samtools/bamtk.c
+ A /trunk/samtools/cut_target.c
+ M /trunk/samtools/errmod.h
+ M /trunk/samtools/faidx.c
+ M /trunk/samtools/khash.h
+ M /trunk/samtools/kstring.c
+ M /trunk/samtools/kstring.h
+ A /trunk/samtools/phase.c
+ M /trunk/samtools/samtools.1
+
+added the phase command
+
+------------------------------------------------------------------------
+r918 | lh3lh3 | 2011-02-24 10:05:54 -0500 (Thu, 24 Feb 2011) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/prob1.c
+ M /trunk/samtools/bcftools/prob1.h
+
+added "const" to bcf_p1_cal()
+
+------------------------------------------------------------------------
+r917 | lh3lh3 | 2011-02-24 09:36:30 -0500 (Thu, 24 Feb 2011) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam.c
+
+more meaningful BAM truncation message
+
+------------------------------------------------------------------------
+r916 | lh3lh3 | 2011-02-24 09:35:06 -0500 (Thu, 24 Feb 2011) | 3 lines
+Changed paths:
+ M /trunk/samtools/bcftools/bcf.c
+ M /trunk/samtools/bcftools/vcf.c
+
+ * automatically fix errors in GL
+ * output unrecognized FORMAT as "."
+
+------------------------------------------------------------------------
+r913 | lh3lh3 | 2011-02-10 22:59:47 -0500 (Thu, 10 Feb 2011) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/bcf.h
+ M /trunk/samtools/bcftools/call1.c
+ M /trunk/samtools/bcftools/vcf.c
+
+finished VCF->BCF conversion
+
+------------------------------------------------------------------------
+r910 | petulda | 2011-02-03 03:13:48 -0500 (Thu, 03 Feb 2011) | 1 line
+Changed paths:
+ M /trunk/samtools/bcftools/vcfutils.pl
+
+Prevent division by zero
+------------------------------------------------------------------------
+r909 | lh3lh3 | 2011-02-02 11:29:20 -0500 (Wed, 02 Feb 2011) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/call1.c
+
+fixed a typo in the VCF header
+
+------------------------------------------------------------------------
+r908 | lh3lh3 | 2011-02-02 11:28:24 -0500 (Wed, 02 Feb 2011) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam_index.c
+
+ * fixed an out-of-boundary bug
+ * improved sorting order checking in index
+
+------------------------------------------------------------------------
+r907 | lh3lh3 | 2011-01-29 22:59:20 -0500 (Sat, 29 Jan 2011) | 4 lines
+Changed paths:
+ M /trunk/samtools/INSTALL
+ M /trunk/samtools/bam_tview.c
+ M /trunk/samtools/knetfile.c
+
+ * avoid a segfault when network connect fails
+ * update INSTALL
+ * fixed a bug in tview on big-endian by Nathan Weeks
+
+------------------------------------------------------------------------
+r903 | lh3lh3 | 2011-01-27 14:50:02 -0500 (Thu, 27 Jan 2011) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bam_md.c
+
+ * fixed a rare memory issue in bam_md.c
+ * fixed a bug in indel calling related to unmapped and refskip reads
+
+------------------------------------------------------------------------
+r902 | lh3lh3 | 2011-01-23 21:46:18 -0500 (Sun, 23 Jan 2011) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/fet.c
+
+fixed two minor bugs in Fisher's exact test
+
+------------------------------------------------------------------------
+r899 | petulda | 2011-01-19 09:28:02 -0500 (Wed, 19 Jan 2011) | 1 line
+Changed paths:
+ M /trunk/samtools/bcftools/vcfutils.pl
+
+Skip sites with unknown ref
+------------------------------------------------------------------------
+r898 | lh3lh3 | 2011-01-15 12:56:05 -0500 (Sat, 15 Jan 2011) | 2 lines
+Changed paths:
+ M /trunk/samtools/ChangeLog
+ M /trunk/samtools/bam_maqcns.c
+ M /trunk/samtools/bam_md.c
+
+move bam_nt16_nt4_table[] from bam_maqcns.c to bam_md.c
+
+------------------------------------------------------------------------
+r896 | lh3lh3 | 2011-01-06 10:52:15 -0500 (Thu, 06 Jan 2011) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/bcftools/bcf.h
+ M /trunk/samtools/bcftools/bcfutils.c
+ M /trunk/samtools/bcftools/call1.c
+
+ * samtools-0.1.12-10 (r896)
+ * allow to exclude read groups in mpileup
+
+------------------------------------------------------------------------
+r895 | lh3lh3 | 2011-01-04 11:31:29 -0500 (Tue, 04 Jan 2011) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/bcf.tex
+
+sorry. It is SP not ST
+
+------------------------------------------------------------------------
+r894 | lh3lh3 | 2011-01-04 11:29:06 -0500 (Tue, 04 Jan 2011) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/bcf.tex
+
+added ST
+
+------------------------------------------------------------------------
+r893 | petulda | 2011-01-04 06:55:56 -0500 (Tue, 04 Jan 2011) | 1 line
+Changed paths:
+ M /trunk/samtools/bcftools/call1.c
+
+Fixed a typo in read_samples
+------------------------------------------------------------------------
+r892 | jmarshall | 2010-12-28 08:06:49 -0500 (Tue, 28 Dec 2010) | 9 lines
+Changed paths:
+ M /trunk/samtools/Makefile
+ M /trunk/samtools/bcftools/Makefile
+ M /trunk/samtools/examples/Makefile
+
+System libraries go *after* user libraries in link commands, because
+the user libraries may themselves have dependencies that are satisfied
+by the system libraries. It's not rocket science!
+
+This makes a difference with some linkers; or with -static or --as-needed.
+
+The examples/Makefile fix is from Charles Plessy.
+See also http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=606004
+
+------------------------------------------------------------------------
+r891 | lh3lh3 | 2010-12-21 12:16:33 -0500 (Tue, 21 Dec 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/bcftools/bcf.h
+ M /trunk/samtools/bcftools/bcfutils.c
+ M /trunk/samtools/bcftools/call1.c
+
+ * samtools-0.1.12-9 (r891)
+ * allow to call SNPs from a subset of samples
+
+------------------------------------------------------------------------
+r889 | lh3lh3 | 2010-12-15 11:28:16 -0500 (Wed, 15 Dec 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.12-12 (r889)
+ * set mapQ as 20 if it equals 255
+
+------------------------------------------------------------------------
+r888 | lh3lh3 | 2010-12-14 22:41:09 -0500 (Tue, 14 Dec 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+
+When -B is applied to mpileup, still use paired reads only unless -A is flagged.
+
+------------------------------------------------------------------------
+r887 | lh3lh3 | 2010-12-14 22:37:05 -0500 (Tue, 14 Dec 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam_md.c
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.12-6 (r887)
+ * added a hidden option -E to mpileup/calmd. -E triggers an alternative way to apply BAQ.
+
+------------------------------------------------------------------------
+r886 | lh3lh3 | 2010-12-14 12:51:03 -0500 (Tue, 14 Dec 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bamtk.c
+
+(Arguably) improved the indel caller a tiny bit for lowCov data.
+
+------------------------------------------------------------------------
+r885 | petulda | 2010-12-14 04:55:46 -0500 (Tue, 14 Dec 2010) | 1 line
+Changed paths:
+ M /trunk/samtools/bcftools/call1.c
+
+Fixed the VCF header to pass validation
+------------------------------------------------------------------------
+r884 | lh3lh3 | 2010-12-12 23:02:19 -0500 (Sun, 12 Dec 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/bcftools/vcfutils.pl
+
+ * samtools-0.1.12-4 (r884)
+ * fixed a long-existing flaw in the INDEL calling model
+
+------------------------------------------------------------------------
+r883 | lh3lh3 | 2010-12-11 20:05:42 -0500 (Sat, 11 Dec 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/bcfutils.c
+ M /trunk/samtools/bcftools/call1.c
+ M /trunk/samtools/bcftools/vcfutils.pl
+
+compute max SP and max GQ from sample genotypes
+
+------------------------------------------------------------------------
+r880 | lh3lh3 | 2010-12-10 10:50:54 -0500 (Fri, 10 Dec 2010) | 2 lines
+Changed paths:
+ D /trunk/samtools/bcftools/bcf-fix.pl
+
+drop bcf-fix.pl as it is redundant by the latest changes
+
+------------------------------------------------------------------------
+r879 | lh3lh3 | 2010-12-10 10:50:29 -0500 (Fri, 10 Dec 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bcftools/call1.c
+ M /trunk/samtools/bcftools/vcf.c
+
+ * fixed a minor issue in printing VCFs
+ * write bcftools specific INFO and FORMAT in the header
+
+------------------------------------------------------------------------
+r878 | lh3lh3 | 2010-12-10 10:09:14 -0500 (Fri, 10 Dec 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/bcftools/bcfutils.c
+ M /trunk/samtools/bcftools/call1.c
+
+Make sure that the GT genotype field is the first
+
+------------------------------------------------------------------------
+r877 | lh3lh3 | 2010-12-08 17:27:05 -0500 (Wed, 08 Dec 2010) | 7 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf.h
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.12-2 (r877)
+
+ * allow to fine control the selection of indel candidates. The current
+ setting is okay for lowCov and highCov with ~100 samples, but it
+ skips too many indels for highCov with >250 samples.
+
+
+------------------------------------------------------------------------
+r874 | lh3lh3 | 2010-12-07 22:40:35 -0500 (Tue, 07 Dec 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam_plcmd.c
+
+a spelling error..
+
+------------------------------------------------------------------------
+r873 | lh3lh3 | 2010-12-07 22:39:57 -0500 (Tue, 07 Dec 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.12-1 (r873)
+ * added a switch to allow anomalous read pairs in calling
+
+------------------------------------------------------------------------
+r872 | lh3lh3 | 2010-12-07 14:43:54 -0500 (Tue, 07 Dec 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/vcfutils.pl
+
+fixed a bug in vcf2fq
+
+------------------------------------------------------------------------
+r869 | lh3lh3 | 2010-12-05 01:18:06 -0500 (Sun, 05 Dec 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bamtk.c
+
+added a warning for the Windows version
+
+------------------------------------------------------------------------
+r868 | lh3lh3 | 2010-12-05 01:05:51 -0500 (Sun, 05 Dec 2010) | 4 lines
+Changed paths:
+ M /trunk/samtools/bcftools/call1.c
+
+In ksprintf(), change "%lf" and "%lg" to "%f" and "%g", respectively.
+According to the manual page, this change is valid. However, MinGW seems
+to interpret "%lf" as "%Lf".
+
+------------------------------------------------------------------------
+r867 | lh3lh3 | 2010-12-05 00:35:43 -0500 (Sun, 05 Dec 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/Makefile.mingw
+ M /trunk/samtools/bam_aux.c
+
+bring back the windows support
+
+------------------------------------------------------------------------
+r866 | lh3lh3 | 2010-12-04 23:33:51 -0500 (Sat, 04 Dec 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam_reheader.c
+ M /trunk/samtools/bcftools/vcfutils.pl
+
+Fixed a compiling error when knetfile is not used.
+
+------------------------------------------------------------------------
+r865 | lh3lh3 | 2010-12-04 00:13:22 -0500 (Sat, 04 Dec 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/vcfutils.pl
+
+vcf->fastq
+
+------------------------------------------------------------------------
+r864 | lh3lh3 | 2010-12-03 17:12:30 -0500 (Fri, 03 Dec 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bcftools/call1.c
+ M /trunk/samtools/bcftools/prob1.c
+ M /trunk/samtools/bcftools/prob1.h
+
+ * remove "-f". Instead always compute consensus quality
+ * increase the upper limit of quality
+
+------------------------------------------------------------------------
+r863 | lh3lh3 | 2010-12-03 15:28:15 -0500 (Fri, 03 Dec 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/bcf.c
+
+more informative error message
+
+------------------------------------------------------------------------
+r862 | lh3lh3 | 2010-12-02 16:16:08 -0500 (Thu, 02 Dec 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/NEWS
+ M /trunk/samtools/bamtk.c
+
+Release samtools-0.1.12a
+
+------------------------------------------------------------------------
+r861 | lh3lh3 | 2010-12-02 15:55:06 -0500 (Thu, 02 Dec 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/call1.c
+
+a possible fix to DP4=0,0,0,0; have not tested, but should have no side-effect
+
+------------------------------------------------------------------------
+r859 | lh3lh3 | 2010-12-02 11:39:57 -0500 (Thu, 02 Dec 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/NEWS
+ M /trunk/samtools/bam_index.c
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/samtools.1
+
+Release samtools-0.1.12
+
+------------------------------------------------------------------------
+r858 | lh3lh3 | 2010-12-02 11:24:41 -0500 (Thu, 02 Dec 2010) | 4 lines
+Changed paths:
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/bcftools/bcf.c
+
+ * samtools-0.1.11-1 (r858)
+ * fixed a bug in mpileup which causes segfaults
+ * bcftools: do not segfault when BCF contains errors
+
+------------------------------------------------------------------------
+r857 | lh3lh3 | 2010-11-30 23:52:50 -0500 (Tue, 30 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam_index.c
+
+fixed a memory leak in bam_fetch()
+
+------------------------------------------------------------------------
+r856 | lh3lh3 | 2010-11-26 00:07:31 -0500 (Fri, 26 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bcftools/vcfutils.pl
+
+ * fixed a memory violation
+ * added splitchr to vcfutils.pl
+
+------------------------------------------------------------------------
+r854 | lh3lh3 | 2010-11-23 09:05:08 -0500 (Tue, 23 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/ld.c
+
+fixed a typo/bug in r^2 computation
+
+------------------------------------------------------------------------
+r852 | lh3lh3 | 2010-11-21 22:20:20 -0500 (Sun, 21 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bamtk.c
+
+forget to change the version information
+
+------------------------------------------------------------------------
+r851 | lh3lh3 | 2010-11-21 22:16:52 -0500 (Sun, 21 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/ChangeLog
+ M /trunk/samtools/NEWS
+ M /trunk/samtools/bcftools/bcftools.1
+ M /trunk/samtools/samtools.1
+
+Release samtools-0.1.11
+
+------------------------------------------------------------------------
+r844 | lh3lh3 | 2010-11-19 23:16:08 -0500 (Fri, 19 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/bcftools/call1.c
+ M /trunk/samtools/bcftools/prob1.c
+ M /trunk/samtools/bcftools/prob1.h
+
+ * samtools-0.1.10-9 (r844)
+ * added the "folded" or reference-free mode for variant calling
+
+------------------------------------------------------------------------
+r843 | lh3lh3 | 2010-11-19 22:26:36 -0500 (Fri, 19 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/NEWS
+ M /trunk/samtools/bam_sort.c
+
+In merging, if -R is specified, do not abort if the sequence dictionary is different.
+
+------------------------------------------------------------------------
+r842 | jmarshall | 2010-11-19 21:24:28 -0500 (Fri, 19 Nov 2010) | 5 lines
+Changed paths:
+ M /trunk/samtools/bam_sort.c
+
+When merging BAM headers, compare the list of target reference sequences
+strictly (and fail/abort if there is a mismatch), but allow one list to be a
+prefix of the other. (i.e., check that the lists are identical up until the
+shorter runs out, and add the excess targets from the longer to the output.)
+
+------------------------------------------------------------------------
+r841 | lh3lh3 | 2010-11-19 14:49:27 -0500 (Fri, 19 Nov 2010) | 4 lines
+Changed paths:
+ M /trunk/samtools/bam_index.c
+ M /trunk/samtools/bam_pileup.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.10 (r841)
+ * fixed a bug in pileup when the first CIGAR operation is D
+ * fixed a bug in view with range query
+
+------------------------------------------------------------------------
+r840 | lh3lh3 | 2010-11-19 13:45:51 -0500 (Fri, 19 Nov 2010) | 10 lines
+Changed paths:
+ M /trunk/samtools/ChangeLog
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf.h
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.10-4 (r840)
+
+ * drop the MNP caller. It is slow while does not diliver too much
+ benefit. Possibly I will work on it in future given more time.
+
+ * there is a segfault in pileup
+
+ * someone has reported segfault from view/index/sort
+
+
+------------------------------------------------------------------------
+r839 | lh3lh3 | 2010-11-18 17:30:11 -0500 (Thu, 18 Nov 2010) | 9 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.h
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.10-6 (r839)
+
+ * call MNPs without realignment because it seems to me that it is not
+ worthwhile to significantly slow down SNP calling.
+
+ * the result looks quite different from the previous version. I have
+ work to do...
+
+
+------------------------------------------------------------------------
+r838 | lh3lh3 | 2010-11-18 11:26:09 -0500 (Thu, 18 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/knetfile.c
+
+Apply a patch by Rob Davis, which improves fault detection.
+
+------------------------------------------------------------------------
+r836 | lh3lh3 | 2010-11-18 11:09:23 -0500 (Thu, 18 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-r836
+ * initiate MNP realignment when the MNP has at least 0.2% frequency (otherwise too slow)
+
+------------------------------------------------------------------------
+r835 | lh3lh3 | 2010-11-18 00:25:13 -0500 (Thu, 18 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bcftools/vcfutils.pl
+
+ * modify the filtering rule: also filter SNPs around filtered indels
+ * added MNP filter
+
+------------------------------------------------------------------------
+r834 | lh3lh3 | 2010-11-17 23:13:52 -0500 (Wed, 17 Nov 2010) | 4 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.10-4 (r834)
+ * fixed a silly bug in printing MNP
+ * restrict to at most 1 alternative allele
+
+------------------------------------------------------------------------
+r833 | lh3lh3 | 2010-11-17 21:58:58 -0500 (Wed, 17 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bamtk.c
+
+fixed a bug in printing MNPs
+
+------------------------------------------------------------------------
+r832 | lh3lh3 | 2010-11-17 21:47:20 -0500 (Wed, 17 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bamtk.c
+
+minor change to how seqQ is applied
+
+------------------------------------------------------------------------
+r831 | lh3lh3 | 2010-11-17 21:41:12 -0500 (Wed, 17 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf.h
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.10 (r831)
+ * initial MNP caller
+
+------------------------------------------------------------------------
+r829 | lh3lh3 | 2010-11-16 23:14:15 -0500 (Tue, 16 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/ChangeLog
+ M /trunk/samtools/NEWS
+ M /trunk/samtools/bamtk.c
+
+Release samtools-0.1.10 (r829)
+
+------------------------------------------------------------------------
+r828 | lh3lh3 | 2010-11-16 20:48:49 -0500 (Tue, 16 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bamtk.c
+
+update version information: samtools-0.1.9-20 (r828)
+
+------------------------------------------------------------------------
+r827 | lh3lh3 | 2010-11-16 15:32:50 -0500 (Tue, 16 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/call1.c
+
+bcftools: allow to skip indels
+
+------------------------------------------------------------------------
+r826 | lh3lh3 | 2010-11-16 14:11:58 -0500 (Tue, 16 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam_md.c
+
+remove ZQ if both BQ and ZQ are present
+
+------------------------------------------------------------------------
+r825 | lh3lh3 | 2010-11-16 13:51:33 -0500 (Tue, 16 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bam_md.c
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/samtools.1
+
+ * samtools-0.1.9-18 (r825)
+ * change the behaviour of calmd such that by default it does not change the base quality
+
+------------------------------------------------------------------------
+r824 | lh3lh3 | 2010-11-15 23:31:53 -0500 (Mon, 15 Nov 2010) | 4 lines
+Changed paths:
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/bcftools/call1.c
+ M /trunk/samtools/samtools.1
+
+ * samtools-0.1.9-17 (r824)
+ * added command line options to change the default parameters in indel calling
+ * update the manual
+
+------------------------------------------------------------------------
+r823 | lh3lh3 | 2010-11-15 12:20:13 -0500 (Mon, 15 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bam_md.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.9-r823
+ * the BQ tag is now 64 shifted, not 33 shifted
+
+------------------------------------------------------------------------
+r822 | lh3lh3 | 2010-11-15 00:30:18 -0500 (Mon, 15 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf.h
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/bcftools/vcfutils.pl
+ M /trunk/samtools/misc/samtools.pl
+
+ * samtools-0.1.9-16 (r822)
+ * keep the raw depth because in indel calling, DP4 may be way off the true depth
+
+------------------------------------------------------------------------
+r821 | lh3lh3 | 2010-11-13 01:18:31 -0500 (Sat, 13 Nov 2010) | 4 lines
+Changed paths:
+ M /trunk/samtools/bam_md.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.9-15 (r821)
+ * calmd: write BQ
+ * skip realignment if BQ is present
+
+------------------------------------------------------------------------
+r820 | lh3lh3 | 2010-11-13 01:08:26 -0500 (Sat, 13 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.9-14 (r820)
+ * penalize reads with excessive differences in indel calling
+
+------------------------------------------------------------------------
+r819 | lh3lh3 | 2010-11-12 21:36:27 -0500 (Fri, 12 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam_maqcns.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.9-13 (r819)
+ * fixed a bug in pileup given refskip
+
+------------------------------------------------------------------------
+r818 | lh3lh3 | 2010-11-12 13:04:53 -0500 (Fri, 12 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-r818
+ * for indel calling, do two rounds of probabilistic realignments
+
+------------------------------------------------------------------------
+r817 | lh3lh3 | 2010-11-11 20:04:07 -0500 (Thu, 11 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/bcftools/vcfutils.pl
+
+ * samtools-0.1.19-11 (r817)
+ * only initiate indel calling when 0.2% of reads contain a gap
+
+------------------------------------------------------------------------
+r816 | lh3lh3 | 2010-11-11 01:22:59 -0500 (Thu, 11 Nov 2010) | 7 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.9-10 (r816)
+
+ * I know why the forward method fails. it is because of zero base
+ qualities. when that is fixed, the forward method seems to give
+ better results than Viterbi, as it should be. I am tired...
+
+
+------------------------------------------------------------------------
+r815 | lh3lh3 | 2010-11-11 00:57:15 -0500 (Thu, 11 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/ChangeLog
+ M /trunk/samtools/bam2bcf_indel.c
+
+effectively revert to the viterbi version. The forward realignment gives too many false positives.
+
+------------------------------------------------------------------------
+r814 | lh3lh3 | 2010-11-11 00:18:02 -0500 (Thu, 11 Nov 2010) | 4 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bam_md.c
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.9-9 (r810)
+ * use forward, instead of viterbi, for realignment
+ * realignment is now quality aware
+
+------------------------------------------------------------------------
+r813 | lh3lh3 | 2010-11-10 22:45:24 -0500 (Wed, 10 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/kprobaln.c
+ M /trunk/samtools/kprobaln.h
+
+ * prepare to replace kaln with kprobaln in realignment
+
+------------------------------------------------------------------------
+r812 | lh3lh3 | 2010-11-10 17:28:50 -0500 (Wed, 10 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/bcf.c
+
+fixed a typo
+
+------------------------------------------------------------------------
+r811 | lh3lh3 | 2010-11-10 16:54:46 -0500 (Wed, 10 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/bcf.c
+ M /trunk/samtools/bcftools/bcf.h
+
+use zlib for direct reading when BCF_LITE is in use
+
+------------------------------------------------------------------------
+r810 | lh3lh3 | 2010-11-10 16:32:13 -0500 (Wed, 10 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+
+ * do not use reads containing too many mismatches for indel calling
+ * fixed a trivial bug in case of multi-allelic indels
+
+------------------------------------------------------------------------
+r809 | lh3lh3 | 2010-11-10 13:23:02 -0500 (Wed, 10 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.9-8 (r809)
+ * fixed a bug in the indel caller
+
+------------------------------------------------------------------------
+r808 | lh3lh3 | 2010-11-10 12:24:10 -0500 (Wed, 10 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/Makefile
+
+minor change to makefile
+
+------------------------------------------------------------------------
+r807 | lh3lh3 | 2010-11-10 12:10:21 -0500 (Wed, 10 Nov 2010) | 4 lines
+Changed paths:
+ M /trunk/samtools/Makefile
+ M /trunk/samtools/bam2bcf.h
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/bcftools/vcfutils.pl
+
+ * samtools-0.1.9-8 (r807)
+ * collect indel candidates only from specified platforms (@RG-PL)
+ * merge varFilter and filter4vcf in vcfutils.pl
+
+------------------------------------------------------------------------
+r806 | lh3lh3 | 2010-11-09 22:05:46 -0500 (Tue, 09 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/call1.c
+ M /trunk/samtools/bcftools/prob1.c
+ M /trunk/samtools/bcftools/prob1.h
+
+bcftools: compute equal-tail (Bayesian) credible interval
+
+------------------------------------------------------------------------
+r805 | lh3lh3 | 2010-11-09 16:28:39 -0500 (Tue, 09 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/vcfutils.pl
+
+added a double-hit filter to avoid overestimated indel likelihood
+
+------------------------------------------------------------------------
+r804 | lh3lh3 | 2010-11-09 14:12:06 -0500 (Tue, 09 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.9-7 (r804)
+ * fixed a bug in the gap caller
+
+------------------------------------------------------------------------
+r803 | lh3lh3 | 2010-11-09 10:45:33 -0500 (Tue, 09 Nov 2010) | 4 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/bcftools/bcf.c
+ M /trunk/samtools/bcftools/bcf.h
+ M /trunk/samtools/bcftools/prob1.c
+
+ * samtools-0.1.9-6 (r803)
+ * mpileup: apply homopolymer correction when calculating GL, instead of before
+ * bcftools: apply a different prior to indels
+
+------------------------------------------------------------------------
+r802 | lh3lh3 | 2010-11-08 23:53:15 -0500 (Mon, 08 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.9-5 (r802)
+ * relax tandem penalty. this will be made a command-line option in future.
+
+------------------------------------------------------------------------
+r801 | lh3lh3 | 2010-11-08 23:35:52 -0500 (Mon, 08 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.9-4 (r801)
+ * fixed a minor issue in printing indel VCF
+
+------------------------------------------------------------------------
+r800 | lh3lh3 | 2010-11-08 15:28:14 -0500 (Mon, 08 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bcftools/vcfutils.pl
+
+fixed another silly bug in mpileup's indel caller
+
+------------------------------------------------------------------------
+r799 | lh3lh3 | 2010-11-08 14:28:27 -0500 (Mon, 08 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+
+fixed a silly bug in the indel caller
+
+------------------------------------------------------------------------
+r798 | lh3lh3 | 2010-11-08 14:07:33 -0500 (Mon, 08 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/ChangeLog
+ M /trunk/samtools/sam_view.c
+ M /trunk/samtools/samtools.1
+
+Incorporate patches by Marcel Martin for read counting.
+
+------------------------------------------------------------------------
+r797 | lh3lh3 | 2010-11-08 13:39:52 -0500 (Mon, 08 Nov 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf.h
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.9-2 (r797)
+ * mpileup: indel calling seems to be working
+
+------------------------------------------------------------------------
+r796 | lh3lh3 | 2010-11-08 10:54:46 -0500 (Mon, 08 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf.h
+ M /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/kaln.c
+
+indel calling is apparently working, but more information needs to be collected
+
+------------------------------------------------------------------------
+r795 | lh3lh3 | 2010-11-08 00:39:18 -0500 (Mon, 08 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf_indel.c
+
+fixed a few bugs in the indel caller. Probably there are more.
+
+------------------------------------------------------------------------
+r794 | lh3lh3 | 2010-11-07 22:23:16 -0500 (Sun, 07 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/Makefile
+ M /trunk/samtools/bam.h
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf.h
+ A /trunk/samtools/bam2bcf_indel.c
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/kaln.c
+ M /trunk/samtools/kaln.h
+
+prepare for the indel caller. It is not ready yet.
+
+------------------------------------------------------------------------
+r793 | lh3lh3 | 2010-11-05 11:28:23 -0400 (Fri, 05 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf.h
+ M /trunk/samtools/bam_plcmd.c
+
+Revert to r790. The recent changes are not good...
+
+------------------------------------------------------------------------
+r792 | lh3lh3 | 2010-11-05 00:19:14 -0400 (Fri, 05 Nov 2010) | 6 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf.h
+ M /trunk/samtools/bam_plcmd.c
+
+ * this revision is UNSTABLE
+
+ * indel caller seems working, but it is very insensitive and has
+ several things I do not quite understand.
+
+
+------------------------------------------------------------------------
+r791 | lh3lh3 | 2010-11-04 22:58:43 -0400 (Thu, 04 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf.h
+ M /trunk/samtools/bam_plcmd.c
+
+for backup. no effective changes
+
+------------------------------------------------------------------------
+r790 | lh3lh3 | 2010-11-03 15:51:24 -0400 (Wed, 03 Nov 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bcftools/vcfutils.pl
+ M /trunk/samtools/kprobaln.c
+
+fixed a minor problem in the example coming with kprobaln.c
+
+------------------------------------------------------------------------
+r789 | lh3lh3 | 2010-11-02 15:41:27 -0400 (Tue, 02 Nov 2010) | 4 lines
+Changed paths:
+ M /trunk/samtools/Makefile
+ M /trunk/samtools/bam_md.c
+ M /trunk/samtools/kaln.c
+ M /trunk/samtools/kaln.h
+ A /trunk/samtools/kprobaln.c
+ A /trunk/samtools/kprobaln.h
+
+Separate kaln and kprobaln as I am preparing further changes. At
+present, the results should be identical to the previous.
+
+
+------------------------------------------------------------------------
+r788 | petulda | 2010-11-02 12:19:04 -0400 (Tue, 02 Nov 2010) | 1 line
+Changed paths:
+ M /trunk/samtools/bam_plcmd.c
+
+Added -b option: read file names from a file
+------------------------------------------------------------------------
+r787 | lh3lh3 | 2010-10-29 23:17:22 -0400 (Fri, 29 Oct 2010) | 7 lines
+Changed paths:
+ M /trunk/samtools/bam.h
+ M /trunk/samtools/bam_pileup.c
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+
+ * samtools-0.1.9-2 (r787)
+
+ * Allow to set a maximum per-sample depth to reduce memory. However,
+ BAQ computation is still applied to every read. The speed is not
+ improved.
+
+
+------------------------------------------------------------------------
+r786 | lh3lh3 | 2010-10-29 12:10:40 -0400 (Fri, 29 Oct 2010) | 3 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf.h
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/bcftools/bcf.c
+ M /trunk/samtools/bcftools/vcf.c
+
+ * samtools-0.1.9-1 (r786)
+ * samtools: optionally perform exact test for each sample
+
+------------------------------------------------------------------------
+r785 | lh3lh3 | 2010-10-29 09:42:25 -0400 (Fri, 29 Oct 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/bam2bcf.c
+ M /trunk/samtools/bam2bcf.h
+ M /trunk/samtools/bam_plcmd.c
+ M /trunk/samtools/bcftools/bcf.c
+
+Optionally output "DP", the individual read depth
+
+------------------------------------------------------------------------
+r784 | lh3lh3 | 2010-10-27 23:10:27 -0400 (Wed, 27 Oct 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/samtools.1
+
+acknowledge Petr and John who have greatly contributed to the project.
+
+------------------------------------------------------------------------
+r783 | lh3lh3 | 2010-10-27 22:47:47 -0400 (Wed, 27 Oct 2010) | 2 lines
+Changed paths:
+ M /trunk/samtools/ChangeLog
+ M /trunk/samtools/NEWS
+ M /trunk/samtools/bamtk.c
+ M /trunk/samtools/samtools.1
+
+Release samtools-0.1.9 (r783)
+
------------------------------------------------------------------------
r782 | lh3lh3 | 2010-10-27 19:58:54 -0400 (Wed, 27 Oct 2010) | 2 lines
Changed paths:
projects / samtools.git / blobdiff