Differences between revisions 1 and 3 (spanning 2 versions)
Revision 1 as of 2011-07-01 08:24:19
Size: 1410
Editor: diane
Comment:
Revision 3 as of 2012-02-02 22:14:30
Size: 1545
Editor: diane
Comment:
Deletions are marked like this. Additions are marked like this.
Line 7: Line 7:
 3. Entire 0431# for the conference number  3. Enter 0431# for the conference number
Line 9: Line 9:
To use iChat. To use video conferences.
Line 12: Line 12:
 2. Turn on the projector  2. Turn on the projector.
Line 17: Line 17:
 5. Press the mouse until the mini turns on.  5. Press a mouse until the mini turns on or hit the power button on the back upper right of the mini.
Line 19: Line 19:
 7. If it doesn't someone probably unplugged the ethernet cable.  7. If it doesn't work someone probably unplugged the ethernet cable going to the switch.
Line 22: Line 22:
    3. Also the lights on the switch should be on, so check to make sure the power is plugged in to the switch.     3. Also their should be two lights on the switch should be on over the ethernet jacks, so check to make sure the power is plugged in to the switch.

Some quick notes about the using the conference room equipment

For the hudson alpha encode conference call, the phone number is programmed into the PolyCom.

  1. Press the Phone Book menu button
  2. Select the encode entry
  3. Enter 0431# for the conference number

To use video conferences.

  1. Make sure the long VGA cable running from the mac mini on the shelf near the screen is plugged into the projector
  2. Turn on the projector.
  3. Try either the white mac wireless mouse
    1. To turn the mac mouse on, flip it over and open the cover over the laser.
    2. (To save battery when done, turn the mouse back off by flipping the cover back)
  4. if the white mouse isn't working there's 2 mice on top of the black computer, one of which is plugged into the mini.
  5. Press a mouse until the mini turns on or hit the power button on the back upper right of the mini.
  6. iChat should automatically start up and say "online" or something
  7. If it doesn't work someone probably unplugged the ethernet cable going to the switch.
    1. There should be a long blue cable going from under the desk into an 8 port ethernet switch.
    2. There should be a shorter cable going from the ethernet switch to the mini.
    3. Also their should be two lights on the switch should be on over the ethernet jacks, so check to make sure the power is plugged in to the switch.
  8. Once you have an internet connection, you should be able to accept the invitation or click on the camera icon to invite someone to a video chat.

WoldlabWiki: Documentation/ConferenceRoom (last edited 2012-02-02 23:06:51 by diane)